Home » Tube Heaters » HL3 Series: Premium, Two Stage Heater
Premium Models
"Contractor Recommended"
- Two-Stage Operation
- Black Coated Aluminzed Tubing
- 10 year warranty
- Diagnostic Board
- Single Stage Operation
- Black Coated Aluminzed Tubing
- 10 year warranty
- Diagnostic Board
Standard Models
Value Engineered Solutions
- Single Stage Operation
- Hot-Rolled Tubing
- 3 year warranty
Residential Models
Low Ceiling - Garage Approved
- Two-Stage Operation
- Black Coated Aluminzed Tubing
- 5 year warranty
- Diagnostic Board
- Single Stage Operation
- Black Coated Aluminzed Tubing
- 5 year warranty
- Diagnostic Board
- ‘Blast Mode’ for environmental demands.
- Three performance curve modes.
- Full proportional-integral derivative logic.
- For wet, contaminated or harsh environments
- Constructed of 304 and 409 stainless steels
- Single Stage Operation.
- Meets the NFPA 30A code having a maximum surface temperature of 750°F
- Single Stage Operation
- Multi-burner, multi-exchanger, multi-reflector platform
- Two-Stage Operation.
- Meets the NFPA 30A code having a maximum surface temperature of 750°F
- Two-Stage Operation
- Multi-burner, multi-exchanger, multi-reflector platform
HL3 Series
Premier, Two-Stage Low Intensity Tube Heater
Optimal Fuel Benefits
The HL3 Series, packed with quality features, represents today’s most energy efficient line of infrared tube heaters. Our patented two-stage technology, incorporated into the HL3 Series, provides more comfort while saving valuable energy dollars. In addition, the highest quality materials and construction features ensure years of reliable and efficient operation. No other infrared heater can match the performance and quality of the HL3 Series.
Key Selling Points
The RE-VERBER-RAY Two-Stage HL Series has been shown to be a more efficient heating system than standard single-stage infra-red heaters.
- 35% reduction in on/off cycles, resulting in improved employee comfort.
- Improved product life due to the reduction in on/off cycles.
- Overall improved operating efficiency, reducing carbon dioxide emissions.
- Faster recoveries. Energy is not wasted reheating the exchangers when “high-fire” is called for.
- Design benefits. The HL Series allows you to design your building in accordance with “worst case” design temperature. Realistically, this rarely occurs and the heater will make the appropriate adjustments.
Product Features
- Patented two-stage operation
- Pre- and post-purge controls
- Self-diagnostic LED, microprocessor based circuitry
- Independent control-air-gas compartments with tool-free access
- Fitted ABS plastic air intake collar
- Reliable hot surface ignition
- Stainless steel flexible gas connector included
- 24 volt controls and power cord standard
Product Specifications
Input Range: 65,000 to 200,000 BTU/h
Product Documentation
Installation Helps
You will need hanging chain, s-hooks and thermostat
Use 4″ venting. Maximum length is 20ft. Only (2) elbows are permitted.
Heaters on the same vent must share the same thermostat.
Reverse polarity. Heater fan runs but ignition never occurs.
Incorrect venting size and length (see installation manual)
Incorrect gas piping – heater fails to get hot
HL3 Series Pricing
Contact us
Our sales staff isn’t paid on commission and we don’t believe in high pressure sales. We’re happy to give you a quote or answer questions.